How to paste advertising paper more smoothly
In daily life, posting advertising paper is one of the important means of publicity and promotion. However, many people often encounter the problem of wrinkled and uneven advertising paper when posting, which affects the appearance and publicity effect. This article will combine the hot topics and hot content on the Internet in the past 10 days to provide you with a detailed guide to posting advertising paper to help you easily solve this problem.
1. Frequently Asked Questions about Posting Advertising Papers
Based on recent discussions and feedback on the Internet, the following are some common problems during the process of posting advertising paper:
| question | frequency of occurrence | main reason |
|---|---|---|
| Wrinkle | high | The glue is unevenly applied or the paper is unevenly stressed |
| Warped edges | middle | The glue has insufficient viscosity or the wall surface is uneven |
| bubble | high | Failure to remove air or excessive glue when posting |
| fall off | Low | Glue quality is poor or environmental humidity is too high |
2. Preparation for posting advertising paper
Before posting advertising paper, adequate preparation is the key to ensuring smooth posting. Here are a few important steps mentioned in recent popular content:
| step | Specific operations | Things to note |
|---|---|---|
| clean surface | Wipe the wall or posted surface with a damp cloth to ensure it is free of dust and oil | Avoid using corrosive cleaning agents |
| Choose glue | Choose the appropriate glue according to the material of the advertising paper (such as double-sided tape, paste, spray glue, etc.) | Avoid using too much glue |
| Measurement location | Use pencil or chalk to mark where the ad paper will be posted. | Ensure horizontal or vertical alignment |
3. Tips for posting advertising paper
The following are the advertising paper posting techniques that have been hotly discussed on the Internet recently to help you easily achieve a smooth effect:
1. Post from the center to all sides
Align the center of the advertising paper with the marked position, press it gently, and then use a scraper or card to scrape it flat from the center to all sides to remove the air.
2. Use spray glue
Spray glue can evenly cover the back of the advertising paper and avoid wrinkles caused by uneven application of glue. Wait a few seconds after spraying glue before posting for better results.
3. Wet pasting method
For thicker advertising paper, you can try the wet pasting method: lightly spray the back of the advertising paper with moisture, and then apply glue, so that the paper can be flattened and adhered more easily.
4. Heat gun assistance
After posting, use a heat gun to gently heat the surface of the advertising paper to help the glue solidify faster and reduce warping and wrinkling.
4. How to post advertising paper with common materials
Advertising paper made of different materials requires different posting methods. Here are several common materials mentioned in recent popular discussions and how to deal with them:
| Material | Posting method | Things to note |
|---|---|---|
| plain paper | Use paste or double-sided tape to smooth it from the center to all sides. | Avoid using excessive force which may cause the paper to break. |
| plastic film | Use spray glue or special film glue, and use a scraper to remove air bubbles | Avoid posting in high temperature environments |
| waterproof paper | Use strong double-sided tape or liquid glue to ensure tight edges | Avoid excessive glue causing penetration |
5. Inspection and maintenance after posting
After the posting is completed, the following inspections and maintenance are required to ensure that the advertising paper remains flat for a long time:
| Check items | How to operate | Maintenance recommendations |
|---|---|---|
| Are the edges lifted? | Gently press the edges with your hands to ensure a good fit | If warped edges are found, reapply a small amount of glue |
| Are there bubbles? | Use a needle to pop the bubbles and press them flat. | Avoid using too much force |
| Is the glue dry? | Wait 24 hours before checking again | Avoid touching wet advertising paper |
6. Summary
With the above steps and techniques, you can easily achieve flat posting of advertising paper. Whether it is ordinary paper or advertising paper made of special materials, as long as you choose the appropriate glue and posting method, you can achieve the desired effect. I hope this article can provide you with practical help to make your advertising more beautiful and professional!
check the details
check the details
en
