How to remove the back seat of Lingpai: Detailed steps and a guide to integrating hot spots across the Internet
Among the hot topics on the Internet recently, car DIY modifications and practical skills have continued to gain attention. This article will combine the hot spots of the past 10 days to provide you with a detailed tutorial on disassembling the rear seat of Honda Lingpai, and attach relevant data for reference.
Hot topic correlation across the entire network (last 10 days)
| Ranking | hot topics | Relevance |
|---|---|---|
| 1 | Car DIY modification boom | 92% |
| 2 | Maintenance tips for Honda models | 85% |
| 3 | Seat cleaning and maintenance | 78% |
| 4 | Interior space optimization | 70% |
The whole process of Lingpai rear seat disassembly
Step 1: Preparation
1. Clear the items in the back seat
2. Prepare tools: Phillips screwdriver, plastic pry bar
3. Make sure the vehicle is turned off and the handbrake is applied
| Tool name | Purpose | alternative |
|---|---|---|
| Phillips screwdriver | Remove the fixing screws | electric screwdriver |
| Plastic pry bar | Avoid scratching the interior | credit card edge |
Step 2: Seat cushion removal
1. Locate the release buckle under the front of the seat
2. Use both hands to lift the front of the cushion upward at the same time
3. Slide back to take out the seat cushion
Frequently Asked Questions Checklist
| Problem phenomenon | solution | Precautions |
|---|---|---|
| Broken buckle | Replace with new buckle (part number: 74251-TBA-A01) | Maintain vertical force when disassembling |
| Slide rail stuck | Spray WD-40 lubricant | Clean tracks regularly |
Step 3: Removal of the backrest
1. Lower the rear backrest
2. Remove the fixing bolts (usually located on both sides)
3. Disconnect seat belt sensor connector (if equipped)
4. Pull up the entire backrest to remove it
Things to note
• Take photos of original position before disassembly
• Store screws and small parts properly
• Electronic component plugs need to be marked
• It is recommended that two people work together
Hotspot Extension: Why do you need to remove the back seat?
According to recent Internet search data:
| Reason | Proportion | Typical scenario |
|---|---|---|
| deep cleaning | 45% | pet hair cleaning |
| Modification and upgrade | 30% | Install seat heating |
| Repair and replacement | 25% | Seat belt assembly repair |
Installation and restore key points
1. Make sure all buckles are aligned
2. Test seat belt function
3. Check the fixing bolt torque (standard value: 39N·m)
4. Verify seat lock status
With this structured guide, you can complete Lingpai rear seat removal safely and efficiently. Recent hot topics have shown that mastering such practical skills can not only solve practical problems, but also lay the foundation for car upgrades and modifications. It is recommended to refer to the maintenance manual of the specific model year of the vehicle when operating. There may be differences in details in different years.
check the details
check the details
en
